Any Questions? Call Us: 0086-731-86880480
NewsCurrent Position : Home > News
changsha Langfeng metallic material CO.,Ltd news
  • TM52 is not recommended for High Chromium Wear Parts

    01 Mar 2017

    Our TiC cermets inserts has the similar thermal expansion coefficient as base material:13% high manganese steel . When the surface of tic rods be melted, two materials will be bonded together perfectly. There is no need to worry about the problem of "drop out ".

  • TM60 and Its Application

    28 Feb 2017

    The difference between TM60 and TM52 steel bonded titanium carbide cermets rods: hardness is HRC 58-60, wear resistance is slightly lower, but higher toughness. TM60 is widely used for boring machine and shaft drilling tool.

  • Tungsten Powder Cost Keep Rising

    23 Feb 2017

    Langfeng Materials produced Zirconium carbide powder in APS (average particle size) FSSS 3-5 micron and FSSS 0.8-1.5 micron, usually be used as additive in tungsten carbide products, like cutting tools...etc. Any need, please send E-mail to us via:

  • WC blank cost increase sharply in early 2017

    22 Feb 2017

    Langfeng Materials' main major: high purity carbide powders, like zirconium carbide powder, titanium carbide powder, TaNbC ..etc play important roles in the production of cutting tools. These carbide pwoders could be used as grain inhibitor, grain finer. We insist using high purity raw materials, ...

  • Current situation of powder metallurgy market

    15 Feb 2017

    China's powder metallurgy industry has been nearly 10 years of rapid development, but with the foreign industry there are still the following aspects of the gap: (1) enterprises, small scale, economic efficiency and foreign companies are very different.

  • Powder metallurgy products market potential

    14 Feb 2017

    In the current market situation, powder metallurgy products in the market is very active, but also has great potential for development, the future development space is infinite.

  • Thermal spraying powder raw materials ordering

    04 Feb 2017

    Spray powder in the thermal spray material occupies a very important position. Thermal spraying alloy powder including nickel-based, iron-based and cobalt-based alloy powder, according to different coating hardness, respectively, used in mechanical parts repair and protection.

  • Zhejiang customers visit TM52 titanium carbide rods

    16 Jan 2017

    Customers for Langfang metal TM52 titanium carbide carbide-based products, ceramic products, a cordial and friendly conversation and technical exchanges.

« 1 2 3 4 5 6 7 »
Online Message
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.
Your Name:
* Your E-mail:
* Message: