News-第3页-Changsha Langfeng Metallic Material Co., Ltd.

Changsha Langfeng Metallic Material Co., Ltd
Changsha Langfeng Metallic Material Co., Ltd. uphold the mission of the world benefit, is committed to doing the field of science and technology advances in new materials, builders, build the world’s material industry aircraft carrier! Our company specializes in R & D, production and sales of new materials for aviation and aerospace, new materials for military rocket systems, spraying materials, functional materials, special ceramic materials, cemented carbide, metal ceramic materials and cutting tools.
Surface Treatment Knowledge Hall： Introduction to thermal spraying
2, the principle of thermal spraying: thermal spraying refers to a series of processes, in these processes, fine and dispersed metal or non-metallic coating material, in a molten or semi-molten state, deposited on a prepared substrate surface , To form some sort of spray deposit. The coating material can be in the form of powder, ribbon, filament or rod. Thermal spray guns provide the necessary heat from the fuel gas, arc or plasma arc to heat the thermal spray material to the plastic or molten state and then subject to compressed air acceleration to impinge the constrained particle beam onto the substrate surface. Particles impinging on the surface are deformed by stamping to form laminated sheets that adhere to the surface of the prepared substrate and subsequently cool and accumulate to form a layered coating. The coating due to the different coating materials can achieve high temperature corrosion, abrasion, heat insulation, anti-electromagnetic wave and other functions.
TiC inserts with a common work hardening characteristics
TiC inserts with a common work hardening characteristics,chromium-based TiC-based cemented carbide and high manganese steel composite casting, the processing of hardening speed, can quickly form a high hardness of the hardened hardening layer, the impact of abrasive wear capacity Increase the range. For more information please link: www.langfengmaterials.com,please contact us: sales@langfengmaterials.com
An effective method of extending tool life
After the success of the tap, the method is applied to all cutting tools. Although the effect of extending the life of various tools is not consistent, the results are still encouraging. By cutting the cutting edge at the beginning or after each machining cycle, the tool life can be increased by 2-4 times. The indexable ceramic milling insert was also tested for more than six months. The advantages of cutting tool cutting edges include improving part quality, extending tool life, reducing tool inventory, and increasing machine tool processing time by reducing tool change frequency. By taking this measure, the company’s annual production cost savings of about $ 12,600.
Notification of Change of company name and Bank Information
Dear Valued Customers & Business Partners, We would like to inform you that with effect from Jan 1st,2020 our company name Changsha Langfeng Metallic Material Co.,Ltd . has changed. From the above date, our company acts under a new name: Hunan WISE New Material Technology Co., Ltd. This change of company name is in line with the fulfillment of our long-term development strategy. At the same time, the address of our office and our billing address, website, email contacts telephone remain unchanged. Bank details will change to: Beneficiary: Hunan WISE New Material Technology Co., Ltd. Account No.:591170905321 Bank Name: Bank of China Changsha Xingsha Sub-branch Bank Address: No.27 Xingsha Avenue National Economic Technical Development Zone,Changsha,Hunan,China Swift code: BKCHCNBJ970 This change of the company name and bank information does not affect the contracts and commitments between you and Changsha Langfeng Metallic Material Co.,Ltd. Contracts signed in the past remain valid. The company’s business, the compliance of any products remain fundamentally unaffected by this change. From the above mentioned date, any new business correspondence, purchase orders, invoices, delivery notes, new contracts and changes to existing contracts between you and us must be done using the new company name Hunan WISE New Material Technology Co., Ltd. Following this change, please update your accounting systems, and...
TiC TaC Cost Rise
Recently , affecting by raw material TiO2(type R) and TaO2, our carbide powders’s unit price will be increased accordingly, like titanium carbide powder TiC, Tantalum carbide powder TaC, TaNbC80:20, TaNbC60:40..etc. Taking TiC powder in APS FSSS2-3micron for example, unit cost will be increase at least USD1.2/kg. For TaC, the cost is only valid within 7days. If you have any need for above powders, please contact us asap via mail : sales@langfengmaterials.com
Langfeng material, focus in the material
Lang Feng materials focus on new materials, military rocket system, new materials, spraying materials, functional materials, special ceramic materials, carbide, metal ceramic materials and cutting tools for the development, production and sales. The company’s products are: metal carbide powder, carbide tiles cutting blade, carbide tiles cutting wheel, carbide cutting blade, carbide cutter blade wheel, TiC-based cermets, Ti (C, N) -based cermet plates, Ti (C, N) -based cermet tubes, and the like. Product sales have been covering more than 50 countries and regions worldwide more than 400 customers, the majority of users by the praise.
Key points of large-scale equipment guide
1.with the flame for low-temperature local baking, the workpiece temperature of about 80-100 ℃, with the grill to wipe with grease, so repeated several times, and then use high-power spray guns quickly spray.

‹1 234 5 ›